Our Firestat switches use a bimetal coil to open a set of contacts when they heat up. However, you may be wondering what these contacts look like, and how they are reset after the switch has been triggered. When placed in an HVAC duct system, it will sense the air temperature. Based on what temperature the device is set at, it will open the contacts whenever that temp is reached, and stop the fan from running and spreading the potential fire or smoke it detected to more areas of the building. Click here to purchase one of our Firestat units today! When the switch heatsRead More →

We sell to a few larger companies, so we though we would highlight one today. The company we are looking at today is Dynacon. Dynacon is an HVAC distributor located in Virginia. They sell our Firestat switches to construction companies who are building or maintaining apartment buildings. Our high limit switches are approved for use in high density residential buildings in North Carolina to shut off fans in case of a fire. This prevents smoke from being blown through the ductwork into the rest of the building. Interested in becoming a distributor for our products? Contact us for distributor pricing.Read More →

Firestat Temperature Control Manual Reset

If you’ve looked at temperature switches before, you’ve most likely heard the term “Bimetal”. But what does that mean? Well, I’m glad you asked. The way Bimetal works is that two different types of metal are fused together. The two metals have different coefficients of thermal expansion, which basically means that they expand at different rates when they heat up. In the case of our switches, the bimetal is in a coil, and the expansion and contraction of the coil is what causes the switch to trigger and open the contacts. Click here to purchase a Firestat unit today! The Duct High Temperature Switches featureRead More →

How to adjust a duct limit temperature switch

Our Firestat switches come in both adjustable and fixed temperature models. However, you may not know what temperature you need in the first place. The temperature you’ll need your Firestat to be set at depends on how close you place it to your furnace and how hot your furnace runs. Our lowest fixed temperature switch is set at 125°F, but the air right next to your furnace might be warmer than that. We recommend that you identify where you plan on installing your duct limit switch before you buy it and measure the air temperature when your furnace is running. Once you know that temperature,Read More →

Firestat Adjustable Duct High Limits

Duct high limit switches are simple devices, so there isn’t much that can be done to stand out among competitors. However, we consistently beat out the competition when it comes to pricing.  This is mostly because our switches only act as limit switches, while most other similar switches also can act as fan switches. This allows us to offer better pricing for those of you who don’t need a fan switch. If you have any questions about our switches or want to get a quote for a larger order, be sure to contact us.Read More →